I'd Rather Be Crafting: November 2015

Tuesday, 24 November 2015

Bundles of Beetroot

A few weeks ago my Dad gave me a load of his home grown beetroot. I love beetroot, but being the only beetroot fan in the house I would never have gotten through it all if I’d pickled it and kept it for myself and there was far too much to try and use it in chocolate cakes, which is my other favourite thing to do with beetroot. So I scoured the web for a beetroot chutney recipe I liked the look of. In the end I decided to roughly follow this one on the BBC Good Food website.

I had more than 1.5kg of beetroot though so decided to use approximately 1.5 times the ingredients. I thought processing that quantity of beetroot would leave the kitchen looking like a murder scene! However, by peeling the beetroot into a colander in a basin of water in the sink wearing disposable gloves and using Maggie the Magimix to chop everything I actually kept things reasonably tidy. What I didn’t factor in though was what the volume of the ingredients would be in increasing the ingredient quantities! I started of using the large stainless steel pan I usually use for making jams and chutneys, but it soon became apparent that the pan was going to end up a little too full! The only thing I had that was bigger was my enamel-lined cast iron Le Creuset casserole dish. I had to use Google to find out if it was OK to use that, which thankfully it looked like it was so I tipped everything into that instead. This also gave me an opportunity to use the giant wooden spoon and spatula for jam and chutney making that my Mum had given me for my birthday.

Whilst the chutney was bubbling away I sterilised the jars. To do this I washed the jars and lids in hot soapy water and then put them in the oven pre-heated to 140⁰C. They need to stay in there for at least 15mins, but I tend to leave them in longer until I’m ready to use them.

Once the chutney was ready, I took the jars out of the oven and spooned the chutney in. I managed to fill 14 jars, which was nearly my entire supply of spare jars! As I can’t eat that much chutney I will be coming some away as Christmas presents. I bought some dissolvable labels on EBay to label up the jars and used some squares of Christmas fabric to cover the lids.

And after all that I still had 2 giant beetroots left, one of which found its way into a chocolate and beetroot loaf and the other I cooked in the microwave and ate!

Thursday, 19 November 2015

Card making tutorial: Tea bag folding with Japanese paper

You will need:

Cutting mat
Ruler
Pencil
Scalpel/scissors
Glue stick
15cm X 15cm blank card
15cm X 15cm piece of patterned paper
5cm X 15cm piece of complimenting patterned paper
6cm X 15cm piece and 9cm X 9cm piece of coordinating coloured card

Take the 15cm X 15cm patterned piece of paper. Here I am using Japanese paper, which works really well for this, but you can use any patterned paper.
Using a pencil and a ruler draw a grid 5cm X 5cm squares on the back.
Carefully cut along the grid lines using a scalpel or pair of scissors. You will have 9 squares.

here

For each 5cm X 5cm square: With wrong-side facing up, fold the paper in half, open out and fold in half the other way. Turn the paper over so the right-side is facing up and fold in half diagonally once and open out. Turn the paper over again so wrong-side is facing up and push the diagonal folds in and up to create a folded 2.5cm X 2.5cm square.
Once you have folded all 8 squares, using a glue stick start to slot one square inside another to create an eight-pointed star as shown below.
Using the glue stick, stick your eight-pointed star to the 9cm X 9cm piece of coloured card (I’ve used a golden yellow) and carefully cut around the points of the star using a scalpel or scissors to create a border approximately 0.5cm wide.

Next cut a 5cm X 15cm piece of coordinating patterned paper and a 6cm X 15cm piece of the same coloured card you used to back the eight-point star.
Stick the piece of patterned paper to the coloured card using a glue stick so that you have a 0.5cm border down the long sides.
Apply glue to the back of the coloured card and position it on your blank card where you want it to be (I positioned mine approximately 2cm in from the folded edge.)

1. Finally, stick the eight-pointed star to the front of the blank card positioning it half way between the top and the bottom and so the top and bottom points are lined up with the edge of the coloured card.

I finished my card off in keeping with a Japanese theme using some Japanese Mizuhiki paper cord to tie a clamshell knot (or Daki Musubi in Japanese) which I glued to the centre of my star. This image posted on Paper Wishes illustrates how to do this.

Monday, 9 November 2015

maps, maps, maps

We have a bit of an obsession with maps in our household. We both did degrees in Geography followed by a masters in Geographical Information Systems so maps are a big part of what we do. We have a number of framed maps hung on our walls along with various other map themed objects. And, of course, whenever I see map fabric I really struggle to not buy some.

My latest map fabric purchase was bought in a fabric shop we stumbled across whilst staying in Kumamoto on a recent visit to Japan and is a half metre piece of heavyweight cotton with a Japanese style map on it:

I haven’t decided what to use this bit of fabric for yet, but it will most likely be turned into a cushion cover as much of my other map fabric has been!

I made these cushions as a present for my younger brother and his fiancé who live in London using fabric I bought on Leicester market:

These cushions were a housewarming present for a friend who is a fellow map fan:

I also used some of the map fabric to redo the cushion pads on our dining room chairs:

But by far my most favourite map themed project to date was to get some map fabric custom printed. I came across Fingerprint at a craft show at the NEC in Birmingham a while ago. What attracted me to their stand were the squares of map fabric printed using images from old atlases. I just could not walk past that stand without taking a look and of course ended up buying a few squares which I made into cushion covers as a present for my older brother:

Whilst at the stand I ended up chatting to Laura Kemshall’s mum who told me about the custom printing. Once I knew what I wanted, I contacted Laura and sent through my images. Laura was really lovely to communicate with and I was absolutely delighted with my fabric when it arrived. I had a half metre printed, which had 3 map squares on that I had lined up to make (yes, you guessed it) more cushion covers. These were going to be special cushion covers though as my plan was to freehand embroider over some of the line work such as contours, rivers, main roads and stands of trees. One of the cushions I then gave as a wedding present and the others (though I still haven’t finished the 3^rd) were for my Mum for her 60^th. I was over-the-moon with the final result. And I keep meaning to get more map fabric custom printed by Fingerprint!

Please note that if you are thinking about having any fabric custom printed then you need to make sure that any images you use are out of copyright.